{"id":329,"date":"2022-09-05T17:20:30","date_gmt":"2022-09-05T09:20:30","guid":{"rendered":"http:\/\/demo.namu66.com\/tronhoo3d\/?p=329"},"modified":"2022-09-13T15:24:48","modified_gmt":"2022-09-13T07:24:48","slug":"poor-infill","status":"publish","type":"post","link":"http:\/\/demo.namu66.com\/tronhoo3d\/329.html","title":{"rendered":"Poor infill"},"content":{"rendered":"\n
\"\"<\/figure>\n\n\n\n

WHAT\u2019S THE ISSUE?<\/strong><\/p>\n\n\n\n

How to judge whether a print is good? The first thing that most people think of is having a beautiful appearance. However, not only the appearance but also the quality of the infill is very important.<\/p>\n\n\n\n

That is because the infill plays a critical part in the strength of the model. If the infill is not strong enough because of some defects, the model will be easily damaged by impact, and the appearance of the model will also be affected.<\/p>\n\n\n\n

POSSIBLE CAUSES<\/strong><\/p>\n\n\n\n

\u2219 Incorrect Settings in Slicing Software<\/p>\n\n\n\n

\u2219 Under-Extrusion<\/p>\n\n\n\n

\u2219 Nozzle Jammed<\/p>\n\n\n\n

TROUBLESHOOTING TIPS<\/strong><\/p>\n\n\n\n

Incorrect Settings in Slicing Software<\/strong><\/strong><\/h2>\n\n\n\n

The settings of the slicing software directly determine the infill style, density, and printing method. If the settings are not proper, the model will not be strong enough due to poor infill.<\/p>\n\n\n\n

CHECK THE inFILL DENSITY<\/p>\n\n\n\n

Generally, an infill density of 20% should be used, and the strength will be weak if the infill density is lower. The larger the model, the greater the infill density is required to ensure the strength of the model.<\/p>\n\n\n\n

DECREASE INFILL SPEED<\/p>\n\n\n\n

Printing speed will affect the quality of printing. Generally speaking, a lower printing speed will have better printing quality. Since the printing quality requirement of the infill is usually not as high as that of the outer wall, the infill printing speed can be higher. But if the infill printing speed is set too high, the strength of the infill will decrease. In this case, the infill strength can be improved by decreasing the infill printing speed.<\/p>\n\n\n\n

CHANGE THE INFILL PATTERN<\/p>\n\n\n\n

Most slicing software can set different infill patterns, such as grids, triangles, hexagons, and so on. Different infill styles have different strengths, so you can try changing the infill pattern to enhance infill strength.<\/p>\n\n\n\n

Under-Extrusion<\/strong><\/strong><\/h2>\n\n\n\n

Under extrusion will also cause defects such as infill missing, poor bonding, and reducing the strength of the model.<\/p>\n\n\n\n

Go to\u00a0the Under-Extrusion\u00a0section for more details on troubleshooting this issue.<\/p>\n\n\n\n

Nozzle Jammed<\/strong><\/strong><\/h2>\n\n\n\n

If the nozzle is slightly jammed, it can also cause defects in the infill.<\/p>\n\n\n\n

Go to\u00a0the Nozzle Jammed\u00a0section for more details on troubleshooting this issue.<\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"How to judge whether a print is good? The first thing that most people think of is to have a beautiful appearance. However, not only the appearance but also the quality of the infill is very important.","protected":false},"author":1,"featured_media":318,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"acf":[],"_links":{"self":[{"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/posts\/329"}],"collection":[{"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/comments?post=329"}],"version-history":[{"count":0,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/posts\/329\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/media\/318"}],"wp:attachment":[{"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/media?parent=329"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/categories?post=329"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/demo.namu66.com\/tronhoo3d\/wp-json\/wp\/v2\/tags?post=329"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}